| |
|
CMM Probe Heads
Your probe system starts with the Probe Head. The selection
of the probe head will determine the touch probe type,
extension capabilities, articulation and even scanning. |
|
Probe Summary
|
Probe Heads |
Touch & Scanning Probes
|
Stylus Chart |
|
|
|
|
|
|
|
TP1S/TP1SM |
|
CMM Style: Manual and DCC
Two piece system, one body
mounted in a fixed vertical axis. The TPs/TPSM
is a 1 inch diameter, shank mounted probe that
is ideally suited for manual CMM operations due
to its robust design and extended over travel
range. It has an M3 stylus mount that carries a
wide range of styli.
View the complete TP1S/TP1SM
Probe Kit.
Probe Heads Home |
 |
|
|
|
|
PH6 |
|
CMM Style: Manual and DCC
The compact vertical and fixed
head accepts all M8 mounting probes (TP2,
TP6,
TP20,
TP200). Economical approach if indexing is
not required. Recommended for production
applications in conjunction with the stylus rack
with up to 6 stylus configurations.
Compatible
with the
MCR20 and
SCR200 stylus change racks.
View
the complete PH6 Probe Kit.
Probe Heads Home |
 |
|
|
|
|
|
|
|
|
PH1 |
|
CMM Style: Manual and DCC
A manual probe head that offers
non-repeatable, articulation in the A and B
axes. The A axis swivels 0° to 115° with a cap
head lock screw. The B axis rotates 360° in 15° spring tensioned indexable increments.
Offers limited over travel for crash
protections. Accepts all M8 mounted touch probes (TP2,
TP6,
TP20,
TP200).
View the complete PH1
Probe Kit.
Probe Heads Home |
 |
|
|
|
|
|
|
|
|
MIH |
|
CMM Style: Manual and DCC
Manually indexable probe head with 720°
repeatable positions eliminating the need to
re-qualify. Provides indexing 360° in the
horizontal plane and 105° of elevation in 7,5°
steps. Accepts all Autojoint mounted touch probes
(TP7M,
TP6A)
or M8 style touch probes when using the PAA1
adapter (TP2,
TP6,
TP20,
TP200).
View the complete
MIH
Probe Kit.
Probe Heads Home |
 |
|
|
|
|
|
|
|
|
MH20i |
|
CMM Style: Manual and DCC
Manually indexable probe head with a built in
TP20 probe and kinematic mount for TP20 modules. The exchangeable modules allow the use
of multiple styli configurations eliminating the need for re-qualifications.
Provides indexing 360° in the horizontal plane
and 90° of elevation in 15° steps.
Note: The MH20i is not
compatible with
the MCR20 module change rack.
View the complete MH20i
probe kit.
Probe Heads Home |
 |
|
|
|
|
RTP20 |
|
CMM Style: DCC
A low cost / low profile
solution to index the probe head automatically. This compact probe head is
designed for use on DCC style CMMs only. Indexes in
the A and B direction in 15° increments
utilizing the powered axes of the CMM to
articulate and lock the probe head.
Based on the MH20i probe head and compatible
with the
TP20 touch probe.
Compatible
with the
MCR20 stylus change rack.
View the complete RTP20 probe kit.
Probe Heads Home |
 |
|
|
|
|
PH10T |
|
CMM Style: DCC
The new PH10T motorized probe
head allows complete, rapid, and repeatable
inspection of most complex components with
minimum human intervention. Full orientation of
your TP2,
TP6,
TP20 or
TP200 probe between any
of 720 positions, under manual or program
control, turns your 3 axis CMM into a 5 axis
machine. Index steps are 7,5°.
Compatible
with the
MCR20 and
SCR200 stylus change racks.
View the complete PH10T probe kit.
Probe Heads Home |
 |
|
|
|
|
PH10M |
|
CMM Style: DCC
The PH10M probe head is designed
with the Autojoint to accommodate longer
extensions (300 mm) as well as the heavier
scanning probes,
SP25M, SP600M and
TP7M.
The autojoint is compatible with the
ACR1, probe
and extension change system.
With the use of the PAA1, standard M8 mounting
touch probes can be used (TP2,
TP6,
TP20,
TP200). When using the PAA1
adapter, the system is compatible with the
MCR20
and
SCR200 stylus change racks.
View the complete PH10M probe kit.
Probe Heads Home |
 |
|
|
|
|
MP100 |
|
CMM Style: Manual
The MP100 MultiProbe is
designed to extend your manual CMM capabilities
by including a video, non-contact probe system
to compliment your existing touch probe
capabilities.
The MultiProbe includes a high-resolution color
CCD camera with a video crosshair generator and
LED ring illumination. The unti incorporates a
M8
View the complete
MP100 probe kit.
Probe Heads Home |
 |
|
| |
