Probe Head

CMM Style: DCC

The PH10M probe head is designed with the Autojoint to accommodate longer extensions (300 mm) as well as the heavier scanning and optical probes, SP25 and OTP6M. The autojoint is compatible with the ACR1, probe and extension change system.

With the use of the PAA1 adapter , standard M8 mounting touch probes can be used. When using the PAA1 adapter, the system is compatible with the MCR20 and SCR200 stylus change racks.

see Renishaw.com - PH10M Specification Sheet.

 
         
Standard Stylus Kit
Qu. Part Number Description
1 A-5000-4156 dia.6 x 10 mm
1 A-5000-4161 dia.4 x 20 mm
1 A-5000-3603 dia.2 x 20 mm
1 M-5000-3647 10 mm Extension
Qu. Part Number Description
1 M-5000-3648 20 mm Extension
2 M-5000-3540 Stylus Tool
1 M-5000-4163 M3/M2 Adapter
Note: M3/M2 Adapter included

Recommended Options

Extended Stylus Kit
Qu. Part Number Description
2 A-5000-4156 dia.6 x 10 mm
2 A-5000-4161 dia.4 x 20 mm
2 A-5000-3603 dia.2 x 20 mm
2 A-5000-7806 dia.1 x 10 mm
2 M-5000-4162 30 mm Extension
2 M-5000-3647 10 mm Extension
Qu. Part Number Description
4 M-5000-3648 20 mm Extension
2 M-5000-3540 Stylus Tool
1 A-1042-1486 Spanner Wrench
1 A-5000-3627 5-Way Center
1 A-1015-7642 Storage Box
Note: M2 Stylus Mount

 
TP7M Touch Probe
Mounting : Autojoint, Multiwire
Stylus Mounting : M2
Repeatability : 0.25 µm (0.000009")
  Trigger Force XY : 2.0 g
  Trigger Force Z : 15.0 g

The TP7M is based on strain gauge technology which provides a higher accuracy than standard touch probes. This technology should only be used on DCC style CMMs where the contact speeds can be controlled and constant. Requires the use of the PI7-2 probe interface.

Fixed Head Manual Indexing Heads Motorized Indexing Head
PH6M   PH10M
 
 
SP25M Scanning Probe System
         
Mounting - Autojoint
 
  Mounting : Magnetic/Optical      
Resolution : <0.10 µm (<0.00004")
Stylus Length : 20mm - 200mm
 

The SP25M scanning probe system has a compact 25mm diameter body that supports scanning and touch trigger probe configurations. There are 4 scanning modules to support various length styli and one TP20 touch probe adapter to data point capturing.

The SP25M system works with the UCC2 CMM Controller which provides full scanning and touch point operations. This system can be mounted on any Probe Head that supports the Autojoint with multiwire

Additional accessories include various changing racks to fit your needs.

Fixed Head Manual Indexing Heads Motorized Indexing Head
PH6M   PH10M
 
 
SP25M Scanning and Touch Modules

CMM Style: DCC

The SP25M system has 4 scanning  modules that provide a variety of stylus length, plus one TP20 touch probe adapter module to perform standard data point capturing.

These modules also mount directly to the MH20 and MH20i indexing probe head without the use of the TP20 touch probe body.
    Body Length Max Stylus Len.
  SM25-1 26.25 mm 20 mm - 50 mm
  SM25-2 33.85 mm 20 mm - 75 mm
  SM25-3 48.05 mm 20 mm - 100 mm
  SM25-4 63.05 mm 20 mm - 200 mm
  SM25-20 16.95 mm Module Dependent
         
ACR1 Stylus Change Rack

CMM Style: DCC

The ACR1 probe change system is designed to work with autojoint compatible probe heads such as the PH10M. There are 8 bays available for a variety of extensions and probe combinations including touch probe and scanning probes.

The ACR1 change rack requires the use of the ACC2-2 control system.