| Probe Head | ||||
CMM Style: Manual and DCC Two piece system, one body mounted in a fixed vertical axis. The TPs/TPSM is a 1 inch diameter, shank mounted probe that is ideally suited for manual CMM operations due to its robust design and extended over travel range. It has an M# stylus mount that carries a wide range of styli.
|
 |
|||
| Standard Stylus Kit | |||||||||||||||||||||||||||||||||||||
 |
 |
 |
 |
 |
 |
|
 |
||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||
Recommended Options
| Extended Stylus Kit | |||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||
| Probe Extension Kit A-1047-7005 | |||||||||||||||||||
|
CMM Style: Manual and DCC A probe extension between the head and the touch probe is used to probe deep features. The M8 thread accepts TP2, TP20 and TP200 probes. The kit contains three lightweight bars made from Aluminum. The complete kit contains the following parts.
|
|
||||||||||||||||||
| MCR20 Stylus Change Rack | |
|
CMM Style: DCC The MCR20 stylus module changing rack provides rapid automatic change of modules without the need to re-qualify. Rack functions completely passive not requiring electrical connections. Installation and set up is simple with the aid of a set-up routine in Geomet properly locating the rack within the machine coordinates. The rack is mounted on a stem that is designed with built-in over travel that serves as crash protection. The MCR20 comes with two modules (6 position rack). The rack can be configured for 2, 3, 4 or 6 ports which are covered with protective docking plates to shield the modules from dirt and debris. |
|
