Probe Head

CMM Style: DCC

A low cost / low profile solution to index the probe head automatically. This compact probe head is designed for use on DCC style CMMs only. Indexes in the A and B direction in 15° increments utilizing the powered axes of the CMM against a plate mounted post to articulate and lock the probe head. Based on the MH20i probe head and compatible with the TP20 touch probe.

Compatible with the RTP20 stylus change rack.

see Renishaw.com - MH8 Specification Sheet.

 
         
Standard Stylus Kit
 
Qu. Part Number Description
1 A-5000-4156 dia.6 x 10 mm
1 A-5000-4161 dia.4 x 20 mm
1 A-5000-3603 dia.2 x 20 mm
1 M-5000-3647 10 mm Extension
Qu. Part Number Description
1 M-5000-3648 20 mm Extension
2 M-5000-3540 Stylus Tool
     
Note: M2 Stylus Mount

Recommended Options

Extended Stylus Kit
Qu. Part Number Description
2 A-5000-4156 dia.6 x 10 mm
2 A-5000-4161 dia.4 x 20 mm
2 A-5000-3603 dia.2 x 20 mm
2 A-5000-7806 dia.1 x 10 mm
2 M-5000-4162 30 mm Extension
2 M-5000-3647 10 mm Extension
Qu. Part Number Description
4 M-5000-3648 20 mm Extension
2 M-5000-3540 Stylus Tool
1 A-1042-1486 Spanner Wrench
1 A-5000-3627 5-Way Center
1 A-1015-7642 Storage Box
Note: M2 Stylus Mount
Probe Extension Kit A-1047-7005

CMM Style: Manual and DCC

A probe extension between the head and the touch probe is used to probe deep features. The M8 thread accepts TP2, TP20 and TP200 probes. The kit contains three lightweight bars made from Aluminum.

The complete kit contains the following parts.

 

  Part Number Length / Description
PEL1 A-1047-3484 50 mm
PEL2 A-1047-3485 100 mm
PEL3 A-1047-3486 200 mm
  A-1015-7694 Mahogany Box
  A-1047-3932 Double Ended Spanner Tool

MCR20 Stylus Change Rack

CMM Style: DCC

The MCR20 stylus module changing rack provides rapid automatic change of modules without the need to re-qualify. Rack functions completely passive not requiring electrical connections. Installation and set up is simple with the aid of a set-up routine in Geomet properly locating the rack within the machine coordinates. The rack is mounted on a stem that is designed with built-in over travel that serves as crash protection.

The MCR20 comes with two modules (6 position rack). The rack can be configured for 2, 3, 4 or 6 ports which are covered with protective docking plates to shield the modules from dirt and debris.