PH10M PLUS MOTORIZED PROBE HEAD

The PH10M PLUS motorized probe head increases throughput by giving automated CMMs the added capability of program controlled probe reorientation. This enables the inspection of features at different angles without the need for frequent, time consuming stylus cluster changes.

PH10T PLUS is compatible with a range of both contact scanning sensors and touch-trigger probes, allowing the size and form of critical features to be determined.

The Autojoint autochange systems provide fast, repeatable probe and extension bar exchange, without the need for re-qualification of the stylus tip, helping to maximize productivity.

Category:

PH10M PLUS probe and extension options

Technical Specifications

Specifications:  
Weight 645 g (22 oz)
CMM mounting Helmel Shank
Probe mounting Multiwired Autojoint (M8 thread probes can be used with PAA probe adapter)
Head controller PHC10-3 PLUS, UCCT3 PLUS or UCCS3
Repeatability of position 0.4μ (0.00002 in) specified at a distance of 100mm (3.94 in) from the A-axis center of rotation

Cycle time:

7.5 ° move
90 ° move

2.5 seconds
3.5 seconds

Total angular movement:

A axis
B axis

0 ° to 105 ° in 7.5 ° steps
±180 ° in 7.5 ° steps
Total number of positions 720
Maximum extension bar 300mm (11.8 in) using PAA3 probe adapter, 450mm (17.7 in) with special PAACF probe extension
Temperature operating range 10°C to 40°C (50°F to 104°F)