SCR200 STYLUS CHANGE RACK
The SCR200 stylus changing rack provides rapid, automatic changing of styli without the need to requalify probe tips. Installation and set-up of the system are achieved with minimal operator skill, as no special CMM cabling, software or communications are required. The SCR200 is powered and serviced entirely by the PI200-3 interface and is fully crashed protected.
|Mounting:||Horizontal or vertical|
|Mounting fixture:||Single stud|
|Number of ports:||6|
|Module location and retention:||Magnetic|
|Repeatability of stylus change (2σ) at 50 mm:||Automatic: 1 μm Manual: 2 μm|
|Change cycle:||< 2 seconds|